Wirbelstromscheider ENOS Splitter Detailaufnahme

Eddy Current Separator INP ECCENTRIC

Magnetic technology

efficient non-ferrous metals separation

IFE eddy current separators are used to separate non-ferrous metals (aluminium, copper, brass, etc.) from bulk material of all kinds.

The product portfolio of IFE comprises two special eccentric designs:

The INPx VIOS is used for the: 

  • removal of non-ferrous particles from bulk streams 
    (biomass, waste wood, etc.)
  • generation of non-ferrous concentrates
    (e.g. WEEE, incineration slag, non-ferrous granules)
  • separate conductors from each other
    (e.g. copper-lead granules, Zorba fractions)

The INPx STRATOS is used for the:

  • removal of non-ferrous particles from bulk streams
    (biomass, waste wood, etc.)
  • generation of non-ferrous concentrates
    (e.g. WEEE, incineration slag)
brush material dependent
magnetic drum optional
customized splitter
Operating principle.

 

 

Conductive particles (aluminium, copper, etc.) are separated from insulators. The eddy currents are induced in conductive particles due to a time-varying magnetic field. This results in repulsive forces. 
Owing to the particularly strong permanentmagnetic field and the high speed of the magnetic rotor, good separation results can be obtained even with small or difficult-to-separate materials.

The material to be separated is transported over the belt conveyor in a single-particle-layer and gets to the area of fast rotating magnetic fields of the head pulley at the discharge side. This induces eddy currents which build up a magnetic field in each particle of non-ferrous metal. The magnetic field opposes the permanentmagnetic field of the magnetic rotor. Therefore a strong impulse is exerted on the parts of non-ferrous metals, throwing these particles off the stream of the conveyed material.

Eccentric Eddy Current Separator

The INPx STRATOS has a horizontal, eccentrically arranged magnetic drum with extremely strong neodymium permanent magnets.
The large rotor diameter causes a strong, deep magnetic field and is therefore particularly suitable for the separation of finest non-ferrous metals (up to 15mm). The discharge point is individually adjustable. Its special multi-pole magnet system results in exceptionally good separation results.

Eccentric Eddy Current Separator 

The IFE VIOS generates an unprecedented repulsion force in the non-ferrous parts to be separated with an absolutely new magnetic system geometry. Through targeted parameterization, the rotor of this separator is also able to separate different non-ferrous metals from each other or to concentrate PCBs from non-ferrous metals.
Just like the STRATOS, it is equipped with a neodymium permanent magnet.

Wirbelstromscheider INP ENOS Maschinenaufnahme
Wirbelstromscheider INP ENOS Fraktionen Detailaufnahme

INPx STRATOS

Data INPx STRATOS

Magnetic drum horizontal, eccentric arranged neodymium permanent magnets
Pole changing frequency  betw. 300 and 900 Hz
Belt speed 2 to 3 m/s
Discharge point individually adjustable to increase the product quality
High magnetic flux density 330 - 370 mT at the belt surface

 

Special functions INPx STRATOS

  • Emptying of the belt in case of loss of voltage due to regenerative feed from the magnet rotor to supply the belt drive motor
  • Separator with optional, automatic splitter adjustment
  • Separation system: available as Fe-NF combination (with IFE magnetic drum in the feeding unit)
  • Belt-changing apparatus
  • Specially developed belt cleaning system (in-house, option)
  • Automatic lubrication system (option)
  • Control via touch panel
  • Standard belt width up to 2 m

INPx VIOS

Data INPx VIOS

Magnetic drum horizontal, eccentric arranged neodymium permanent magnets
Pole changing frequency betw. 200 and 600 Hz
Belt speed 2 to 3 m/s
High-end magnetic system enables to generate a third weak-magnetic fraction (stainless steel)
High magnetic flux density 510 - 550 mT at the belt surface

 

Special functions INPx VIOS

  • Emptying of the belt in case of loss of voltage due to regenerative feed from the magnet rotor to supply the belt drive motor
  • Separator with optional, automatic splitter adjustment
  • Separation system: available as Fe-NF combination (with IFE magnetic drum in the feeding unit)
  • Three-products-splitter system for stainless-steel-separation (option)
  • Belt-changing apparatus
  • Specially developed belt cleaning system (in-house, option)
  • Automatic lubrication system (option)
  • Control via touch panel
  • Standard belt width up to 2 m
  • Separation of conductors from each other

 

Industries

Production of glasses of primary and secondary raw materials (e.g. recycled glass)

More

Production of wood chips, pellets, fiber board

More

Includes municipal and commercial waste, building site remains, scraps, light packaging and landfill remediation

More

Processing of scrap metals of all types and origins

More

Production of building materials such as lime, mortar and plaster

More

Application examples

References & Industries

Recycling industry

33 Machines in AT, GER, HU, IT, GB

Scrap industry

21 Machines in GER, AT, CH, RO, HU

Wood industry

6 Machines in GB, USA, AT

Glass and ceramics production

3 Machines in GER